YOUARECUTE Cover Base nr22 5ml

Product detailed description

Features:

• Not suitable for straightening long nails without prior strengthening.
• Provides a high level of coverage of the natural nail due to high pigmentation.
• Hypoallergenic and has a neutral odor.
• Drying time in the lamp is 120 seconds.
• You can heat it up further to make the consistency even thinner.
• Minimal shrinkage is possible during wear due to the elasticity of the base.
• Requires Rubber Base backing.
• It has an acidity of 5–6 pH.
• The power of the drying lamp is 36–48 W. The lamp must be original.
• It is perfectly removed both by sawing and using liquid.
• Provides flaking-free wear for 3–4 weeks.
• Elastic and flexible.
• The basic rule when leveling: the thickness at the edge of the nail should be 0.5 mm.
• Thixotropic - becomes thinner if you move the brush while working.
• It does not flow and self-levels very quickly.
• It has a medium consistency.

Application method:

1. Withdrawal.
2. We do not file the nail shape or leave it 2 mm long, which we will remove after leveling.
3. Use a 220-grit file to file the nail without applying strong pressure from above, lifting the scales of the nail plate, or use a 100-grit buff.
4. Let's do a manicure.
5. If we work with removers, we wash our hands with soap after working with them.
6. Degrease the nail with Nail Prep. Do two approaches. Use 4 wipes for this (1 wipe for 5 fingers). First approach: wipe the surface of the nail. Second approach: take an orange stick, put a wipe on it and wipe everything in the cuticle area and in the sinuses.
7. We use a primer if desired, but if the base for the substrate has sufficient acidity, then it is not needed.
8. The Rubber Base is best applied with a flat gel brush. The movements should be rubbing. We draw all the sinuses of the nail and dry in the lamp for 60 seconds.
9. We recommend not removing the tackiness from the base coat, as it helps chemically bond with subsequent layers of coating (gel, color, base coat). Removing the tacky layer weakens the chemical adhesion and there is a risk of peeling.
10. Level it out. Dry in the lamp for 90 seconds.
11. File the shape after it has been smoothed out. This is necessary so that a thickness forms on the edge of the nail that will hold the free edge.
12. We erase the stickiness.
13. Cover with top coat. Dry for 120 seconds. After drying, do not wipe with anything, as the shine may be lost.

Ingredients: Polyacrylic Acid, Hema, Hydroxycyclohexyl Phenyl Ketone, Ethyl Trimethylbenzoyl Phenylphosphinate, Silica
May Contain: CI 45380, CI 15850, CI 77491, CI 15985, CI 77492, CI 77007, CI 77510, CI 77742, CI 77289, CI 77499, CI 77891, CI 77000