BUILDER GEL PRO "VALERI", 15 ml №02

Volume: 15 ml and 30 ml, without a brush.

Application Technology

1. Prepare the nail plate: remove the previous coating, perform mechanical nail preparation, shape the nail, and complete the manicure.
2. Degrease the nail plate using Valeri Nail Prep&Cleanser 3-in-1 and apply the acid-free Valeri Ultrabond.
3. Apply a thin base layer of Valeri Rubber Base Pro over the entire nail and cure in a UV/LED lamp for 60–120 seconds.
4. Apply the selected Valeri Builder Gel Pro using the desired technique — nail extension or natural nail strengthening — and cure in a UV/LED lamp for 60–120 seconds.
5. If necessary, refine the shape and surface of the nail with a nail file.
6. Apply a leveling layer of the gel and cure in the lamp for 10–15 seconds. Then pinch the arch of the extended nail and complete curing in a UV/LED lamp for 60–120 seconds.
7. Apply Valeri Top No Wipe Pro and cure in a UV/LED lamp for 60–120 seconds.

When using Valeri Rubber Top Pro, remove the inhibition (sticky) layer 2–3 minutes after curing.

Important Notes

• Gels containing particles should be thoroughly mixed before use.
• We recommend using original lamps to ensure the correct application technology and curing process.
• After curing, the material may have an inhibition (sticky) layer. It is recommended to remove it before applying color gel polish or top coat.
• Apply a thin layer of gel around the cuticle area to help prevent air pockets and lifting.
• The consistency of the materials is affected by ambient temperature. During winter, the materials become thicker, while in summer they become more fluid.

Important!

To prevent unwanted polymerization of the material during application, testing, or content creation, keep the open jar or brush as far away from daylight as possible, especially direct sunlight.

Please note that even on cloudy days, clouds allow a significant amount of ultraviolet radiation to pass through. This amount can be sufficient to initiate polymerization of the material.

Polymerization

Cure in a 48W LED/UV lamp for 60–120 seconds for each layer, depending on the pigmentation of the product and the thickness of the applied layer.

Ingredients

ACRYLATES COPOLYMER, (2,2-DIMETHYL-1,3-DIOXOLANE-4-YL) METHYL ACRYLATE, SILICA DIMETHYL SILYLATE, TRIMETHYLBENZOYL DITOLYLPHOSPHINE OXIDE, PPG-2 NEOPENTYL GLYCOL DIACRYLATE, +/- CI 77891, CI 18965, CI 15510, CI 73360, CI 73385, CI 74160, CI 74260, CI 77266.

Precautions

For professional use only. May cause an allergic reaction. Keep away from hot surfaces, open flames, and ultraviolet radiation. Avoid contact with skin. Keep out of reach of children.

Storage Conditions

Store at a temperature between 15°C and +23°C.

Shelf Life

24 months.