Product detailed description

DESCRIPTION:

• high-quality engraving for easy and convenient use;
• allows you to create even complex designs without any drawing skills;
• we recommend using it together with DARK STAMPING POLISH and the DARK Stamping Nail Art Stamper.

HOW TO USE:

1. Perform a manicure and apply a base/gel or color, then cure in a lamp;
2. If there is a noticeable sticky layer, remove it using DARK GEL CLEANSER;
3. Apply the polish to the plate, remove the excess with a scraper and transfer the design onto the stamper;
4. Transfer the design from the stamper onto the nail using a rolling or straight motion;
5. Seal with a top coat. If the top coat slides off the design, first apply a thin layer of clear base and then apply the top coat.

WHY THE DESIGN MAY NOT TRANSFER PROPERLY TO THE STAMPER:

1. The polish should not be too thick. Pick up enough polish on the brush to ensure there is enough product to fill and spread across the design;
2. Apply the polish to the plate using 1–2 quick strokes. The longer you take to apply the polish, the greater the chance of poor transfer because the polish dries in the air;
3. Hold the scraper at approximately a 45° angle and do not press too hard, otherwise you may “squeeze” the polish out of the design;
4. Work quickly with the scraper – 2–4 strokes are enough. Do not make long sweeping movements across the entire plate;
5. Quickly put the scraper aside and pick up the stamper. Remember: when working with polish, there is no time to waste;
6. Transfer the design onto the stamper using a soft rolling motion. DO NOT try to press the stamper firmly into the plate – the harder you press, the more polish will remain in the plate.