Stamping Polish Dark 40, 10 ml

Product detailed description

Application Method:

• Perform the manicure and apply a base coat, gel, or color coating. Cure in a lamp.

• If a sticky inhibition layer remains on the surface, remove it using DARK GEL CLEANSER.

• Apply the polish to the stamping plate, scrape off the excess with a scraper, and transfer the design onto the stamping head.

• Transfer the design from the stamper to the nail using a smooth rolling motion or a straight, even movement.

• Apply a top coat. If the top coat causes the design to smudge or run, first apply a thin layer of clear base coat, then apply the top coat.

Why the design may not transfer properly onto the stamper:

1. The polish must not be thickened. Pick up enough polish with the brush to ensure there is sufficient product to spread across the entire design.

2. Apply the polish to the plate using one or two strokes. The longer you take to apply it, the less effectively the design may transfer, because the polish dries when exposed to air.

3. Hold the scraper at an angle of approximately 45 degrees and avoid pressing too hard, as this may push the polish out of the design.

4. Work quickly with the scraper — 2–4 strokes are usually sufficient. Avoid sweeping movements across the entire plate.

5. Immediately put down the scraper and pick up the stamper. Remember that when working with stamping polishes, every second counts.

6. Transfer the design onto the stamper using a gentle rolling motion. DO NOT press the stamper firmly into the plate. The harder you press, the more polish will remain on the plate.

Volume: 10 ml

Important Information:

• The product has European and Ukrainian quality certificates.

• The product is registered in the CPNP system.

• For professional use only.

• None of the DARK products are tested on animals.

• Use original lamps with all DARK products.

• Read the instructions carefully before use.

• The product color shown in the image may differ slightly from the actual color. This may be due to individual screen settings (brightness, contrast, and color profile), lighting conditions during photography, or technical limitations of digital color reproduction. We make every effort to represent the product as accurately as possible, but minor differences may occur.

• The manufacturer may update product formulations to improve performance. The most recent ingredient list is always available on the product packaging.

• If you have an allergy or individual intolerance to any of the ingredients in this product, its use is prohibited. In such cases, consult a doctor before use.

Main ingredients: Butyl Acetate, Ethyl Acetate, Acrylates Copolymer, Acetyl Tributyl Citrate.